Use PT Series Part Number Crossover Tool to convert from 100, 200, 300 and 615 Series transmitters to new PT Series transmitters.
Use PT Series Part Number Crossover Tool to convert from 100, 200, 300 and 615 Series transmitters to new PT Series transmitters.
Type |
N/A Pressure Transmitter |
Clamp Size |
N/A 1-1/2 in |
Weight |
N/A 1.1 lb |
Storage Temperature [Min] |
N/A -40 ºC212 ºF |
Storage Temperature [Max] |
N/A -40 ºC100 ºF |
Housing Material |
N/A 316 Stainless Steel |
Full Scale Best Fit Straight Line (BFSL) Accuracy (±) |
N/A 0.125 %0.25 % |
Output Signal |
N/A 4 mA to 20 mA, 2-Wire, 0 Vdc to 5 Vdc 3-Wire, 1 Vdc to 5 Vdc 3-Wire, 1 Vdc to 6 Vdc 3-Wire, 0 Vdc to 10 Vdc, 3-Wire, 1 Vdc to 11 Vdc 3-Wire |
Electrical Connection |
N/A M12 x 1 (4-pin) |
Environmental Rating |
N/A Ingress Protection (IP65) |
Series |
N/A 11 |
Connection Material |
N/A 316 Stainless Steel |
Seal Fill Fluid |
N/A FFL77 White Oil |
Transducer |
N/A Series 615 transducer |
Pressure Range |
N/A 0 to 5 psig |
Stability |
N/A ±0.2% full scale for 1 year, non-accumulating |
Adjustment |
N/A ±10% full scale for zero and span |
Response Time |
N/A ≤10 ms |
Service Life |
N/A > 100,000,000 Load Cycles |
Power Requirement |
N/A 10 Vdc to 30 Vdc (4 mA to 20 mA, 2-Wire, 0 Vdc to 5 Vdc, 3-Wire, 1 Vdc to 5 Vdc, 3-Wire, 1 Vdc to 6 Vdc, 3-Wire) 14 Vdc to 30 Vdc (0 Vdc to 10 Vdc, 3-Wire, Vdc to 11 Vdc, 3-Wire) |
Current for 4 to 20 Milliampere (mA) |
N/A 0.020 A |
Resistance for 1 to 5 Direct Current (DC) Voltage Output |
N/A ≤ 5,000 O |
Resistance for 0 to 10 Direct Current (DC) Voltage Output |
N/A ≤ 10,000 O |
Resistance for 0.5 to 4.5 Direct Current (DC) Voltage Output |
N/A ≤ 4,500 O |
Measuring Element |
N/A 316 Stainless Steel |
Electrical Protection |
N/A Reverse polarity, over-voltage and short circuit protection |
Electromagnetic Rating |
N/A European Conformity (CE) Compliant to Electromagnetic Compatibility (EMC) Norm European Standards (EN) 61326:2014/A1:1998, Radio Frequency Interference (RFI), Electromagnetic Interference (EMI) and Electrostatic Discharge (ESD) Protection |
Shock According to International Electrotechnical Commission (IEC) 60068-2-27 |
N/A 1,000 g |
Vibration According to International Electrotechnical Commission (IEC) 60068-2-6 |
N/A 150 g |
Warranty |
N/A 3 yr |
Unit Net Weight |
N/A 1.1 lb |
Compensated Temperature Range |
N/A 30 to 175 ºF0 to 80 ºC |
Note for Compensated Temperature Range |
N/A Effect ±0.01%/ºF for zero and span |
Media Temperature Range |
N/A -40 to 300 ºF-40 to 150 ºC |
Ambient Temperature Range |
N/A -40 to 176 ºF-40 to 80 ºC |
Limitations Which Apply Are |
N/A
These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation. In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice. |
Options and Accessories |
N/A
|
Digital Indicators |
N/A NOSHOK Digital Indicators provide local indication for pressure, level and temperature transmitters. |
Sanitary Clamps and Gaskets |
N/A
1-1/2" (CR 12) 2" (CR 16) 2-1/2" (CR 20) 3" (CR 24) NBR Gasket 1-1/2" (BG 12) 2" (BG 16) 2-1/2" (BG 20) 3" (BG 24) PTFE Gasket 1-1/2" (TG 12) 2" (TG 16) 2-1/2" (TG 20) 3" (TG 24) |
Caution |
N/A
NOSHOK pressure transmitters or transducers are not to be used in heat sterilization systems as stated in 3A Standard 74-03 paragraph D10.1.2. Diaphragm seal must be installed facing downward or in a vertical position for drainability. Do not install diaphragm seal facing in an upward position. |
Prop 65 Warnings |
N/A
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|