MENU
NOSHOK'S COVID-19 Response
Request Information
  • Ranges from 0 psig to 200 through 0 psig to 15,000 psig
  • Current & voltage outputs available
  • Stainless Steel wetted parts
Unit of Measure

Specifications

Type

 N/A Micro-Size Transducer

Series

 N/A 660

Electromagnetic Rating

 N/A European Conformity (CE) Compliant to Electromagnetic Compatibility (EMC) Norm European Standards (EN) 61326:2014/A1:1998, Radio Frequency Interference (RFI), Electromagnetic Interference (EMI) and Electrostatic Discharge (ESD) Protection

Storage Temperature [Min]

 N/A -40 ºC-40 ºF

Storage Temperature [Max]

 N/A 100 ºC212 ºF

Housing Material

 N/A 316 Stainless Steel

Output Signal

 N/A 4 mA to 20 mA, 2-wire

Process Connections

 N/A 1/4 in. National Pipe Thread (NPT) Male

Electrical Connection

 N/A M12 x 1 (4-pin)

Power Requirement

 N/A 10 Vdc to 36 Vdc (4 mA to 20 mA, 2-wire)
8 Vdc to 36 Vdc (1 Vdc to 5 Vdc, 3-wire)
14 Vdc to 36 Vdc (0.1 Vdc to 10 Vdc, 3-wire)
Pressure Range1 N/A 0 to 500 psig
Full Scale Best Fit Straight Line (BFSL) Accuracy (±)2 N/A 0.25 %

Stability

 N/A ≤±0.2% full scale for 1 year, non-accumulating

Service Life

 N/A > 100,000,000 Load Cycles

Compensated Temperature Range

 N/A -4 to 185 ºF-20 to 185 ºC

Note for Compensated Temperature Range

 N/A Zero effect ± 0.01% full scale/ºF
Span effect ± 0.01% full scale/ºF
Media Temperature Range3 N/A -40 to 257 ºF-13 to 185 ºF-40 to 100 ºC-40 to 125 ºC

Ambient Temperature Range

 N/A -4 to 185 ºF-25 to 85 ºC

Load Limitations

 N/A ≤(VPower-10)/0.020 Amp for 4 mA to 20 mA
≥10,000 Ω for 0 Vdc to 10 Vdc, 3-wire
≥5,000 Ω for 0 Vdc to 5 Vdc, 3-wire

Proof Pressure

 N/A 2 Times Full Scale

Burst Pressure

 N/A 9 Times Full Scale

Measuring Element

 N/A 17-4PH Stainless Steel

Connection Material

 N/A 316 Stainless Steel

Environmental Rating

 N/A Ingress Protection (IP65); Ingress Protection (IP67) M12x1 electrical connection for pressure ranges 0 psig to 1,500 psig or higher

Electrical Protection

 N/A Reverse polarity, over-voltage and short circuit protection

Shock According to International Electrotechnical Commission (IEC) 60068-2-27

 N/A 1,000 g

Vibration According to International Electrotechnical Commission (IEC) 60068-2-6

 N/A 20 g

Approximate Weight

 N/A 1.75 oz

Warranty

 N/A 3 yr

Options

 N/A Threaded Orifice

Standard Orifice

 N/A 1.0 mm

Response Time

 N/A <2 ms (between 10% and 90% full scale); restrictor port I.D. to dampen pulsations

Related Items

 N/A , 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve
, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve

Application

Application

 N/A
  • Hydraulics & pneumatics
  • Mobile hydraulics
  • Power generation
  • Pumps & compressors
  • Refrigeration controls

Prop 65 Warnings

Prop 65 Warnings

 N/A
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Limitations Which Apply Are

Limitations Which Apply Are

 N/A These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.

In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.

Additional Information

Additional Information

 N/A
  • 1.0 mm standard orifice size for improved performance in dynamic applications
  • CE compliant to suppress RFI, EMI and ESD
  • Ideal for applications including hydraulics & pneumatics, mobile hydraulics, power generation, pumps & compressors and refrigeration controls

Options and Accessories

Assembly Options

 N/A NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.

Diaphragm Seals

 N/A NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.

Digital Indicators

 N/A NOSHOK Digital Indicators provide local indication for pressure, level and temperature transmitters.

Distribution Manifolds

 N/A NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.

Pressure Snubbers - Piston Type

 N/A
  • Resist clogging and are self-cleaning
  • Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
  • Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
  • Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"​​​​​​

Pressure Snubbers - Sintered Type

 N/A
  • Cost effective solution to protect expensive instrumentation
  • Increases gauge readability by smoothing out pressure surges, pulsations and spikes
  • 5 basic elements available for each snubber to accommodate specific application needs
  • Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
  • Exotic materials or intermediate disc grades available
  • Provides long service life with no moving parts to wear out
  • Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2

Steam Syphons

 N/A
  • Protect the instrument from the damaging effects of high temperature steam
  • Recommended for use in all steam applications
  • Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF

Swivel Adapters

 N/A
  • Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
  • Used with gauges and gauge valves to adjust the line of sight
  • Rotates 360º to allow the connected instrument to be positioned in the desired direction
  • The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
  • All 316 Stainless Steel construction
  • Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
  • Also available with 1/4" NPT connections, same specifications apply
  • Weight approximately 0.8 lb.
  • 1 Other ranges available on special request
  • 2 Includes the effects of non-linearity, hysteresis, non-repeatability, zero point and full scale errors
  • 3 Available on request